software

John Roman · 3447

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline John Roman

  • Sr. Member
  • ****
    • Posts: 392
on: March 02, 2012, 10:32:33 AM
I'm looking for some design software. A simple freeware program to make a print for the bass bins. I'm using a PC running Win7.
Thanks

Regards,
John
Extended Foreplay 3 / 300B Paramount's / BassZilla open baffle/ Music Streamer 2 / Lenovo Y560-Win7-JRMC & JPlay

Offline Yoder

  • Sr. Member
  • ****
    • Posts: 253
Reply #1 on: March 02, 2012, 02:19:21 PM
Pardon my ignorance, but are you looking for something to construct schematics and PCBs? If so, this is what I have been playing with the last week http://www.cadsoftusa.com/downloads/


Offline John Roman

  • Sr. Member
  • ****
    • Posts: 392
Reply #2 on: March 04, 2012, 04:41:34 AM
Not an electrical schematic, just something used to render a 2 or 3D drawing. I'll be able to look at different box configs and design some support bracing for the interior of the bass bin. The bin is nothing special but a few details need to be in print so I'm sure the cabinet makers work is clearly defined. A cut list is essential. Would you know of a site that may be able to help?
John

Regards,
John
Extended Foreplay 3 / 300B Paramount's / BassZilla open baffle/ Music Streamer 2 / Lenovo Y560-Win7-JRMC & JPlay

Offline dgb

  • Jr. Member
  • **
    • Posts: 32
Reply #3 on: March 04, 2012, 05:38:27 AM
googles got you covered sans the "cut list"
http://sketchup.google.com/




Pages: 1   Go Up
« previous next »