Bottlehead Forum

Bottlehead Kits => S.E.X. Kit => Topic started by: joralieu on March 15, 2021, 10:10:01 AM

Title: 0 ohm resistors
Post by: joralieu on March 15, 2021, 10:10:01 AM

Can I use a wire instead of the 0 ohm resistors on page 54 ?

Title: Re: 0 ohm resistors
Post by: Paul Birkeland on March 15, 2021, 10:28:12 AM

You can, but you don't need to. 

Title: Re: 0 ohm resistors
Post by: joralieu on March 15, 2021, 12:54:13 PM

Okay, why are they used there.

Title: Re: 0 ohm resistors
Post by: Paul Birkeland on March 15, 2021, 01:17:48 PM

Stripping really short pieces of the teflon covered wire can be really difficult, so using a jumper is preferable.

Title: Re: 0 ohm resistors
Post by: joralieu on March 15, 2021, 01:59:02 PM

Thanks

Title: Re: 0 ohm resistors
Post by: Tubegopher on March 15, 2021, 04:57:00 PM

OK Paul... a little Deja Vu! It does cause some questions ;D

Title: Re: 0 ohm resistors
Post by: Paul Birkeland on March 16, 2021, 06:06:58 AM

They've been in the kits for 7 years, but there does seem to be a fair amount of recent interest.