Bottlehead Forum
Bottlehead Kits => Moreplay => Topic started by: btol on November 14, 2022, 03:19:46 PM
-
Moreplay is arriving tomorrow and I'm reading through the manual. I notice the manual is recommending only the top side of the chassis and end bell be painted for proper grounding. Does this still apply if I were to have them powder coated? I imagine it's not really possible to just powder coat one side...
-
You can scrape off the powder coating around the bottom side of the mounting holes when you get it back from the powder coater.
-
You can scrape off the powder coating around the bottom side of the mounting holes when you get it back from the powder coater.
Thank you PB!
If I were to ditch the powder coating and just went with the bare chassis/end bell, is this good for sealing the end bell and preventing rust?
Rust-Oleum 285093 Stops Rust Spray Paint, 12 Oz, Matte Clear
-
Any paint on the cover will do the job, other than water based variants I suppose.