Eros 2

benzxc · 7016

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline benzxc

  • Full Member
  • ***
    • Posts: 105
on: April 28, 2024, 10:53:57 PM
Does anybody know the dimensions of the Eros 2 and BeePre 2? Apologies if this information is available but I cannot seem to locate it on the site or forum.

I caught the DIY bug after building the Pipettes (reminded me of how fun it was to build the Crack and Stereomour II that I built like 4-5 years ago), and I am dying for something that I can take out my soldering station out. So I am trying to find a new project to do. I don't really need a new phono or preamp but if it fits...


Ben Chiou

Offline hmbscott

  • Full Member
  • ***
    • Posts: 119
Reply #1 on: April 29, 2024, 11:07:16 AM
Most kits list the chassis plate size. But nowhere is the base size listed. It runs 1-1/4" wider and deeper than the chassis plate, and is 3-3/4" tall feet included. The overall hight including items sticking above the chassis plate is highly variable depending on the kit, but most typically will be the tubes.

Scott
[Ortofon 2M Bronze > U-Turn Theory > Eros II] & [iMac via USB > Denafrips Ares 2] >> Moreplay >> Schiit Lokius EQ >> Stereomour II >> Hsu ULS-15 Sub >> homemade DML Speakers
Moreplay 2nd out >> [Crack + Speedball > HD 650]

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9645
    • Bottlehead
Reply #2 on: April 29, 2024, 01:29:45 PM
Chassis panel is 8"x12" so base is a bit shy of 9.5" x 13.5". About 6" tall.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline benzxc

  • Full Member
  • ***
    • Posts: 105
Reply #3 on: May 13, 2024, 08:37:27 PM
Thanks! Can I also get the dimensions for the BeePre 2 as well? Especially the height with the stock tubes. I know 300Bs run quite hot so I need to make sure I have enough top ventilation.

Ben Chiou

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9645
    • Bottlehead
Reply #4 on: May 14, 2024, 05:07:54 AM
BeePre2 is about 11.5"Dx17.5"Wx9" H. Allow an inch or two clearance above that for air flow.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Pages: 1   Go Up
« previous next »