Bottlehead Forum
Bottlehead Kits => Eros Phono => Topic started by: travisty on October 22, 2009, 01:35:15 AM
-
I am wondering if anyone has done this yet and if so what the results have been like and of course, the best way to do this...
-
It's going to depend mostly on which SUT you are planning on using. There is space up towards the inputs to install something the size of a Cinemag under the chassis. Keep the wiring short to reduce hum pickup. Shielding may be necessary. I had a pair of Cinemag's in the prototype to determine layout but never ran them. I ended up using 4722's which required a seperate box due to size.