Other Gear > Headphones

How hard is it to open a pair of HD-650s?

(1/2) > >>

Jim R.:
Just curious if anybody has opened up their HD-650s, and if so, how difficult is it?  Are there any instructions anywhere for doing this?

Thanks,

Jim

Paul Birkeland:
HD-600's aren't too hard to pop open, so I'd assume the HD-600 isn't so bad.  What are you needing to replace?  There are some photo walkthroughs here and there on the net.

Jim R.:
Paul,

Well, the photo walk-throughs don't do me too muchgood :-).

Just toying with the idea of captive wiring at some point when I find the right cable recipe I like.

But I will probably get a pair of 600s too before I commit to that.

-- Jim

John Roman:
Hi Jim,
I just ordered a pair of the HD 650's. Am curious what if any conclusions you've come to regarding the cable? I've also ordered a Crack/Speedball amp and am anxious to experience the set up.
regards, John

Jim R.:
John,

I actually ended up swapping the 650s for a pair of 600s, so I can't offer any advice on the cables.

I did just recently get a headroom/cardas "Fat Pipe" cable that I'm reterminating with a Neutrik right angle connector for use with the Crack and S.e.x. amps.

-- Jim

Navigation

[0] Message Index

[#] Next page