Bottlehead Forum

Bottlehead Kits => Eros Phono => Topic started by: tipatina on July 21, 2016, 03:53:33 PM

Title: new to bottlehead
Post by: tipatina on July 21, 2016, 03:53:33 PM

I am considering this kit to use as a phono pre with grado reference sonata MM/MI. I am not totally new to kit building-this would be my second kit as I have recently finished building the Akitika 101 solid state power amp. I used this iron:
Stahl Tools SSVT Variable Temperature Soldering Iron Station and Kester 60/40 .031" Solder
Will this basic equipment along with tools and multimeter be sufficient?
Will this phono stage be ok with the grado wood body 5mv output?
Thanks

Title: Re: new to bottlehead
Post by: Doc B. on July 21, 2016, 05:38:40 PM

Yup, those tools are fine and the Eros will work well with your cartridge.