Crack build problem [Solved]

Tonydatigerr · 822

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Tonydatigerr

  • Jr. Member
  • **
    • Posts: 25
on: January 24, 2014, 08:27:22 PM
Hey guys, just got my crack today and I'm super excited for it! However, I have run into a problem on page 14 of the manual where the terminal strips are supposed to be secured onto the screws going through the power transfer. The issue is that the screws are too large for the holes in the strip and I can't seem to find my power drill - is there anything else that I can do to remedy this? Thanks all :)
« Last Edit: January 25, 2014, 07:17:55 AM by Tonydatigerr »


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19383
Reply #1 on: January 24, 2014, 08:33:01 PM
See the first instruction/first photo on page 14. There is a self tapping screw included with the kit to cut threads into these terminal strips.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Tonydatigerr

  • Jr. Member
  • **
    • Posts: 25
Reply #2 on: January 25, 2014, 07:17:35 AM
Oh wow... I'm blind. Thanks for the help!


Pages: 1   Go Up
« previous next »