Bottlehead Forum
Bottlehead Kits => Legacy Kit Products => Stereomour => Topic started by: Thoburn on September 27, 2011, 08:50:22 AM
-
Forgive me if this is a duplicate of some other thread, but I didn't find one and thought I'd ask the question.
I am still running the stock 2A3 tubes in mine.
What have others tried and what are the impressions? Good or bad or ?
-
The only 2a3s I have used other than the stock tubes are the JJ 2a3-40s. I installed them and never looked back, better in every area IMO.
Best,
Ed
-
I have the Paramours, monoblocks of the Stereomour circuit, almost. I started with the stock Sovteks, nice and really showed me what a good amp Bottlehead makes. The Sovteks got old and I bought the Shuguang 2A3Cs on the recommendation of several posters. Really liked those! I have swapped some RCA Blackplates in and out and still think for the going prices today the Shuguang are a killer.
-
i have used the sovteks of course -the shuguang 2a3c -the sophia 300B/ 2.5 v-and in my daughters the shuguang and the sophia electric bakelite base meshplate 2a3-they all sound great-there is more to the sophia tubes than the others- i was and still am using the 300B/ 2.5 v in my stereomour--my favorite which i sent along to my daughter was the sophia meshplate 2a3-
howie
-
Ed already knows what I like.
Of course I tried the Sovteks that came with the kit. Then some JAN RCAs from the 1940s that have a sweet sound but without the desired extension in both bass and high end. The are also not as quiet as I would like...I've bought a few RCA/Cunningham tubes and had the same results, so if you like mid-range magic and don't mind a bit more noise (only noticeable without music playing), then the RCA family is the way to go, perhaps.
But I love my JJ 2A3-40s. I would rather swap out my 12AT7 and play that way...and that is a fun game to play! I just don't feel like taking my JJs out!
John
-
i have used the sovteks of course -the shuguang 2a3c -the sophia 300B/ 2.5 v-and in my daughters the shuguang and the sophia electric bakelite base meshplate 2a3-they all sound great-there is more to the sophia tubes than the others- i was and still am using the 300B/ 2.5 v in my stereomour--my favorite which i sent along to my daughter was the sophia meshplate 2a3-
howie
On the old board, pre Stereomour days, the TJ Mesh Plates were well received. I don't know if they are still made. No one seems to post about them these days. But my point, poorly stated, is that the mesh plate seems to make a difference.
-
Hello all,
I'm new here and love the Paramours I recently acquired. I tried the Shuguangs 2a3c's from a Dared amp and really like their sound and looks. They seem more detailed and richer than the dryer sounding RCA black plates and are approximately 1/2 inch taller. The Valve Arts came with my Paramours but I've yet to give them a try.
The Paramours are excellent driving my OB Tang Band 1808s which sit atop some H-Frame Alphas powered by Dayton monoblocks.
-
i have used the sovteks of course -the shuguang 2a3c -the sophia 300B/ 2.5 v-and in my daughters the shuguang and the sophia electric bakelite base meshplate 2a3-they all sound great-there is more to the sophia tubes than the others- i was and still am using the 300B/ 2.5 v in my stereomour--my favorite which i sent along to my daughter was the sophia meshplate 2a3-
howie
Are you talking about the Princess mesh plate or the standard mesh plate? Big price difference.
-
i have used the sovteks of course -the shuguang 2a3c -the sophia 300B/ 2.5 v-and in my daughters the shuguang and the sophia electric bakelite base meshplate 2a3-they all sound great-there is more to the sophia tubes than the others- i was and still am using the 300B/ 2.5 v in my stereomour--my favorite which i sent along to my daughter was the sophia meshplate 2a3-
howie
Are you talking about the Princess mesh plate or the standard mesh plate? Big price difference.
Update: Must be the standard because it is the only one I see at their web site that has a black base. The standard at $235.00 a pair with the 30 day warranty.
-
standard 2a3 --the 300b/2.5v is a princess
-
My favorite 2A3 is the TJ 2A3/n mesh plate (ceramic base, gold pins), the 2A3c was not on the market when I purchased the TJ's so I have not listened to this tube.
I like the sound of the TJ better than the NOS 45 (ST and Globe) tubes in my Yamamoto A-08S 45 amp, I did not think that the Sovtek or Value Art 2A3 sounded better than a NOS 45 in the Yamamato.