Bottlehead Forum
Bottlehead Kits => Crack => Topic started by: andrzej.suski on August 28, 2021, 05:29:49 AM
-
Hi,
I just installed the speedball upgrade. The small board works beautifully. The voltage check on the bigger board is around 115V for OA and OB. That's 15% higher than the specified range - is it a problem?
Thank you so much in advance!
-
If they are both consistent that's unlikely to be an issue. These voltages can appear to be a bit higher of the OA/OB voltages on the small PC board are also a little high, or if the 6080 you're using has very high emission.
-
Excellent news!
Thank you!