Bottlehead Forum
Bottlehead Kits => Stereomour II => Topic started by: Wayne100 on March 20, 2022, 08:04:27 AM
-
Did some troubleshooting with doc the other day and found 2 blown resistors going from terminal 44 to term 30 and 31. sent me new ones ,put them in and did voltage checks. All good except terminal 4 and 17 both zero on startup which is right but after about 30 seconds both read 9 volts. Is this ok?
-
Do they read 9V, or something else like 9mV?
-
you are right mv
-
0.009V is plenty close to 0V in that position.
-
Thanks Paul