Upgrades

Christopher.sizemore · 1337

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Christopher.sizemore

  • Newbie
  • *
    • Posts: 2
on: September 09, 2023, 12:36:48 PM
I am curious about upgrading the resistors in the moreplay; specifically the 619 ohm resistors. Would it be reasonable to replace these with 620 ohm carbon film resistors?


Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5779
Reply #1 on: September 09, 2023, 02:24:34 PM
That would work, though I wouldn't call it an upgrade.

The stock resistor is a 1% precision metal film; a 620-ohm carbon film would be 5% precision and possibly a little noisier. Not that the noise, if any, would be audible since those resistors are bypassed with 150uF caps. 

Paul Joppa

Offline Christopher.sizemore

  • Newbie
  • *
    • Posts: 2
Reply #2 on: September 10, 2023, 01:48:59 AM
Thanks for the information! Would it make sense to change any of the other resistors? I’ve seen several posts where people mention it.


Pages: 1   Go Up
« previous next »