New Crack build - question right off the bat [resolved]

Mr. Electric Wizard · 2190

0 Members and 1 Guest are viewing this topic.

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19390
Reply #30 on: April 22, 2020, 12:23:47 PM
Doh!  I did have a 1/4" to 1/8" adapter plugged in.  I forgot it was there.

OK, good, I'm not crazy! (today...)

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Mr. Electric Wizard

  • Full Member
  • ***
    • Posts: 62
Reply #31 on: April 22, 2020, 02:43:13 PM
No you are not.  I am going to double check tomorrow when I get my new DMM but yay, I'm happy!
This was a fun little build.



Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9561
    • Bottlehead
Reply #32 on: April 22, 2020, 03:51:52 PM
Yes he is.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline Mr. Electric Wizard

  • Full Member
  • ***
    • Posts: 62
Reply #33 on: April 23, 2020, 03:05:13 AM
Just wanted to let you guys know that I received my new DMM this morning and re-did the resistance checks again, and we're all good!
This new one is auto ranging which helps a lot!

Also, I wanted to thank you both for your support and troubleshooting help!
Thank you!



Offline Mr. Electric Wizard

  • Full Member
  • ***
    • Posts: 62
Reply #34 on: April 23, 2020, 03:17:13 AM
Voltages check out too!
I did hear a pop when I connected the ground clip to the 12 terminal but I never saw any smoke or anything, and the voltages all check out.
Will connect the inputs and headphones soon and try it out.
Thanks again!



Offline Mr. Electric Wizard

  • Full Member
  • ***
    • Posts: 62
Reply #35 on: April 23, 2020, 03:42:30 AM
She lives!
Now I just have to figure out the routing in my MiniDSP unit to get it all perfect.



Offline Mr. Electric Wizard

  • Full Member
  • ***
    • Posts: 62
Reply #36 on: April 24, 2020, 02:48:06 AM
Sounds pretty dang awesome pre-Speedball!
I'm loving it. ;D