BeePre 2 now taking orders - introductory pricing, save $100

[johnsonad]

Derek, you will be impressed with the BP2

[Deke609]

Derek, you will be impressed with the BP2

I'm sure I will. I'm particularly interested in learning about the cathode follower that drops the output impedance and how it ties in with the C4S and new attenuator resistors values. And any other new coolness involved.

Aaron - You write with assurance. Did you end up with the prototype? Id so, what are your impressions of it as compared to the BP1?

cheers, Derek

[Doc B.]

Thank you, Thomas and thank you, Gideon!

[Alby0521]

Hello

While I wait for the new Beepre 2, can I run my Kaiju directly from the Eros ii phono?

Best

AB

[Thermioniclife]

No, neither the Kaiju or the Eros has a level control.
But if you want a temporary solution you could take a cheap rca cable and cut it in half and wire it up to a cheap stereo potentiometer
then install between the Eros output and the Kaiju input. This will hold you over until the BP2 is complete.

[Alby0521]

Hi lee

Thanks for the reply. On my Kaiju I do have volume control. Actually 2 of them, one for left and one for right channel.

Am I missing something?

Best

AB

[Thermioniclife]

OH I am sorry, I was not aware the Kaiju had volume controls(i do not own one) In your case just plug your Eros in and you will be fine.
My apologies again.

[Alby0521]

No worries. I just thought I was missing something. I believe they are not real volume control but just balance pots. However they work as volume control in my case.

[Paul Joppa]

The Kaiju level controls are linear pots, not logarithmic, so they get pretty twitchy at low levels. They are there to adjust the amp if you have too much gain in the rest of the system. But they will work, especially if you want it loud!

[Alby0521]

Tried it out. It’s good! Can’t wait to put in line the beepre 2.

In terms of caps upgrade for the beepre2 I guess the only caps worth upgrading would be the 10uf 250v?

Thanks

AB

[Paul Birkeland]

Yes, swapping out the 10uF/250V caps is an option.  I would recommend buying four.

[Alby0521]

Oh 4 of them? I see only 2 in the manual. What other caps would be interested in swapping with the 10uf ?

[Paul Birkeland]

Save them for the second upgrade.

[Alby0521]

Got it!!!

[Alby0521]

Hello

I placed an order for the model2 when it was released. Are you going to have the upgrades available before you ship the first batch?

Best

AB