Eros Build Resistances Consistently Higher Than Called For

Sugar Man · 1109

0 Members and 1 Guest are viewing this topic.

Offline Sugar Man

  • Full Member
  • ***
    • Posts: 127
    • The Last Honest Lawyer
Just finished my Eros and have the following resistances that are higher than called for:

2    85.4K   71K
4    74.9K   60K
9    46.6K   39K
10  46.6K   39K
12  74.9K   60K
14  85.4K   71K

A4, B4   .621K    *
A6, B6   74.9K   60K

C1  46.6K   39K
C2  75.1K   60K
C4  .621K    *
C6  46.6K   39K
C7  75K      60K

Because these measurements are more than 15% high, I thought I'd post before firing her up.

Mike "Stein" Ayotte

Current Gear:

Elekit TU-8600 300B w/Lundahl Trannies
Herron Audio VTPH-2a
Rega RP8 w/ Apheta 2
Bluesound Node 2i
Audio Note E Speaker Kit-04 w/ AlNiCo drivers

Stereomour II w/ Jupiters
Eros w/ Mundorf Silver Oils
Blumenstein Orcas & Subs


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9560
    • Bottlehead
Reply #1 on: February 12, 2016, 06:22:52 AM
You're OK. When doing the resistance measurements you are mostly making sure there are no zeros where there should be a higher reading (and vice versa), that would indicate a miswire. Small variations like you are seeing usually happen because different DMMs react differently to capacitors in the circuit getting charged by the DMM's battery.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline Sugar Man

  • Full Member
  • ***
    • Posts: 127
    • The Last Honest Lawyer
Reply #2 on: February 12, 2016, 06:29:52 AM
Thanks Doc.  Just like to be certain before venturing into the live voltage checks.  :o 8)

Mike "Stein" Ayotte

Current Gear:

Elekit TU-8600 300B w/Lundahl Trannies
Herron Audio VTPH-2a
Rega RP8 w/ Apheta 2
Bluesound Node 2i
Audio Note E Speaker Kit-04 w/ AlNiCo drivers

Stereomour II w/ Jupiters
Eros w/ Mundorf Silver Oils
Blumenstein Orcas & Subs