Bottlehead Forum
Bottlehead Kits => Legacy Kit Products => Stereomour => Topic started by: Strathorncat on September 08, 2010, 04:21:05 AM
-
I'm wondering what changes to the amp could/should be made to use as a power amp. Remove the input select circuit and switch, of course. My question is: what to replace the volume pot with? A fixed resistor? Anything else? Thanks!
P.S. new to forum, but have a Seduction and Paramounts.
-
The old Paramours had a fixed 249k Ohm resistor across the input RCA jack.
-
Thanks.
Since they both are rated at 270k input impedance, that seems reasonable.
Appreciate the response.