Bottlehead Forum
Bottlehead Kits => Crack => Topic started by: John.soriano on June 28, 2021, 07:39:06 PM
-
The red LED that's attached to A8 isnt lighting up
My Voltages are as follows,
1. 152
2. 170
3. 0
4. 170
5. 81
6. 0
7. 151
8. 0
9. 105
10. 0
Please help, thanks!
-
Do both halves of the 12AU7 glow? Can you post some build pics?
-
I have included pictures of my build,
it looks like both halves of the 12AU7 glow, not sure how bright its supposed to glow though, i added a picture of it as well
also please excuse my beginner level soldering skills
-
You'll want to trim the twisted leads on those 3K resistors for sure.
If you measure the DC voltage carefully at A8, is it 0V or about 12V?
-
Trimming the twisted leads has done the trick and both LED's are now lighting up, i feel silly now. appreciate your help!
-
That shouldn't have fixed the issue, but if you have a loose connection somewhere that may have temporarily made things work properly.
-
I did find a connection that i forgot to solder, now working perfectly, thanks for your help Paul