Bottlehead Forum
Bottlehead Kits => Bottlehead Power Cord Kit => Topic started by: Grainger49 on February 01, 2013, 01:49:44 PM
-
I'm looking for a plug that has terminals. I need it for my last Bottlehead Power Cord. My P300 is plugged into an outlet (PS Audio Power Port) behind a very heavy cabinet (oak, 100 pounds empty). I will wrestle it out to plug in the cord but I need one that doesn't extend 3" from the wall. Something like the molded plug pictured below.
Anyone have a link?
Thanks,
-
http://www.mounts.com/product?product=PSD-ACR72
i don't see how to purchase it!!
http://www.pacificcable.com/Picture_Page.asp?DataName=S-PWR-MFX2-12
http://www.smarthome.com/78924/Calrad-55-789RT-Short-Extension-Cord-with-3-Prong-Right-Angle-Flat-Plug-Black-1-Foot/p.aspx
-
Howard,
Thanks for the links. But I'm looking for a plug that can be attached on the "feed" end of a Bottlehead power cord. The pictured plug is on a 12" device like the third link.
But what I'm wanting to do is find one that can be screwed on then shrink tubed to permanency.
-
http://www.grainger.com/Grainger/HUBBELL-WIRING-DEVICEKELLEMS-Insulgrip-Straight-6A665?Pid=search
more http://www.grainger.com/Grainger/wwg/search.shtml?searchQuery=plug+angle&op=search&Ntt=plug%7Cplug+angle&sst=All&N=14909 (ftp://www.grainger.com/Grainger/wwg/search.shtml?searchQuery=plug+angle&op=search&Ntt=plug%7Cplug+angle&sst=All&N=14909)
-
Robert,
A-HA! That is the booger I have been looking for and look where it is! I have never seen my name so many times on a page in a catalog.
Thank you! Knowing Hubbell it will flip 180 degrees too.
-
robert-i also thank you-as i also needed one --so i bought two-as grainger says --that is the booger--
-
I just ordered 2, from Grainger (WW, that is).
-
So, did you give yourself a discount? ;)...John
-
I did think about asking for one.
When giving my name after I said, "Grainger" I said, "You can spell that one." and she laughed.