Quickie gets underway

Wardsweb · 10972

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Wardsweb

  • Full Member
  • ***
    • Posts: 199
on: December 25, 2009, 05:10:10 AM
Here is a sneek peak of the cabinet I'm working on. I'm still trying to decide which veneer I'm going to cover it with.

(https://forum.bottlehead.com/proxy.php?request=http%3A%2F%2Fwardsweb.org%2Faudio%2Fquickie%2Fquickiecurve.jpg&hash=b3d75ce55a77c1a9fbc291b14ef3712dcd607757)
« Last Edit: December 25, 2009, 06:55:22 AM by Wardsweb »


Offline travisty

  • Jr. Member
  • **
    • Posts: 16
Reply #1 on: December 26, 2009, 12:28:37 AM
The bit directly underneath looks reasonably nice.
And it looks like you already have it at home... so no need to shell out extra bucks...  and you'd have some left over for the next piece so you could match the quickie with other pieces so it's got that going for it...

but in seriousness, that's a great form. Is it wood?





System1: Jadis Eurythmies, Jadis JP-80, ZYX Artisan, Denon DP-100 (and others)
System2: Altec Model19s, EAR 859, Diatone LT-1, Sony SDC-777ES
currently replacing System2 electronics with BH Paramounts, FP3, Eros.
Listening Wear: BH baseball cap, obviously...

Offline Wardsweb

  • Full Member
  • ***
    • Posts: 199
Reply #2 on: December 26, 2009, 06:29:20 AM
I decided to go with some Brazilian rosewood that I've had in the garage. Some preban stuff left over from some DIY corner horns I did years ago. It is the same stuff I used on a Foreplay that had the black side posts/legs.

The Quickie is stock except for the aluminum volume knob and some button allen head bolts I used in place of the slotted one in the kit.

(https://forum.bottlehead.com/proxy.php?request=http%3A%2F%2Fwardsweb.org%2Faudio%2Fquickie%2Fquickieveneer500.jpg&hash=9c2eda86aa9312bfda9bee4b0cf4aff9a72cccc1)
« Last Edit: December 26, 2009, 06:31:35 AM by Wardsweb »


Pages: 1   Go Up
« previous next »