Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Foreplay III => Topic started by: caffeinator on November 08, 2012, 06:59:21 AM

Title: Dummy Loads for FPIII Break-in
Post by: caffeinator on November 08, 2012, 06:59:21 AM

If I wanted to run my FPIII for break-in time (not in a system), should some kind of dummy loads be used on the outputs, and, if so, what would be a good resistance to use?

Title: Re: Dummy Loads for FPIII Break-in
Post by: Doc B. on November 08, 2012, 07:01:22 AM

No need for a load, just turn it on and run some signal into it.