Bottlehead Forum
Bottlehead Kits => Kaiju Stereo 300B amp => Topic started by: Deke609 on August 23, 2019, 12:49:02 PM
-
I'm thinking about trying a 10H 100-120 DCR choke in the PS in place of the last 120R resistor. It looks good in PSUD - knocks ripple to about 1mV. But I need to know the max DC current draw of the amp to choose an appropriate choke. Is this a known figure?
Edit: rethinking this in light of a 2016 post by Doc B to the effect that a choke might blunt transient response - not what I want. But the HV DC current draw would still be good to know.
many thanks, Derek
-
About 173mA.
-
Thanks again PB.
cheers, Derek