General Category > Kit Assembly Service

Crack/Speedball big board voltages high [resolved]

(1/1)

Rabco:
Hello. My small board numbers for voltage were all on the money. My Big Board numbers are as follows:
OA 115v; OB 112.4; G 0v; B+ 185.V
I feel a little silly as these numbers for OA & OB are very close to OK. But I thought I’d check. Better to be safe than sorry. Thanks!

Paul Birkeland:
You may have a very high emission 6080, which will produce slightly higher cathode voltages to hit the target current, so I wouldn't be too concerned about that. 

-PB

Rabco:
Thanks for the quick reply Paul. Its appreciated!
Rabco

Navigation

[0] Message Index