Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Paramount => Topic started by: debk on July 21, 2012, 08:17:07 AM

Title: Rg 249K resistor in 2a3 direct coupled version
Post by: debk on July 21, 2012, 08:17:07 AM

The schematic of the 2a3 version shows Rg (grid resistor) a 249K resistor.  The construction manual leaves it out.  The instruction specifically state that you do not use this resistor.

I built the amp assuming that the instruction are correct.

Is the schematic in error?

Thanks

Deb

PS; the amps sound great and a lot of fun to build

Title: Re: Rg 249K resistor in 2a3 direct coupled version
Post by: Doc B. on July 21, 2012, 08:19:03 AM

Yes, the schematic is in error.