Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Quickie => Topic started by: SailorMac on August 16, 2014, 04:14:18 AM

Title: Quickie 1.1 Selector Switch Assembly Question
Post by: SailorMac on August 16, 2014, 04:14:18 AM

Underneath the lock watcher there is a retaining washer which fits into a slot on the top of the switch, the slots are to the right of numbers 2-11. Which slot should it be in? I flipped it over when taking the lock washer off before I noted the position.

Title: Re: Quickie 1.1 Selector Switch Assembly Question
Post by: mcandmar on August 16, 2014, 04:34:55 AM

The indent sets the number of positions the switch has so find the position that gives you three clicks, i.e. off-input1-input2.

Title: Re: Quickie 1.1 Selector Switch Assembly Question
Post by: SailorMac on August 16, 2014, 04:51:48 AM

Thanks. That's the hole slot to the right of 3 (which makes sense).