Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Reduction => Topic started by: ryburdman on February 25, 2021, 07:40:12 AM

Title: Resistor problem for 59L [resolved]
Post by: ryburdman on February 25, 2021, 07:40:12 AM

 In my clean up before voltage checking clipped the resistor lead from 60U to 59L. Can I use a piece of wire to connect 59 and 60 as a fix? Or do I need to order a new 1K 1W resistor (brown black red gold)

Title: Re: Resistor problem for 59L
Post by: Paul Birkeland on February 25, 2021, 07:44:01 AM

Yes, a piece of wire will work just fine.

Title: Re: Resistor problem for 59L
Post by: ryburdman on February 25, 2021, 08:09:38 AM

thank you