Pre-amp needed?!

eddhartwellmusic · 1357

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline eddhartwellmusic

  • Jr. Member
  • **
    • Posts: 15
on: September 08, 2016, 11:32:11 PM
Hi, please forgive my ignorance, but I currently have a Rega RP6 turntable, with the Exact MM cartridge, Rega Fono stage and Bottlehead Mainline headphone amp.
I was looking at getting the Bottlehead Reduction to replace the Rega, but I have a couple of questions -

1. I'm pretty sure it is, but this phono stage is designed for Moving Magnet cartridges right?
2. Will I also need a pre-amp? (hence the subject title  ;) )

If any advice could be given before the sale ends on Sunday, that'd be great!


Offline Chris65

  • Sr. Member
  • ****
    • Posts: 341
Reply #1 on: September 08, 2016, 11:35:21 PM
Yes, the Reduction is a MM phono stage. This can feed your Mainline directly, no need for a pre-amp.


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9561
    • Bottlehead
Reply #2 on: September 09, 2016, 04:48:56 AM
Reduction is intended for use with MM cartridges with at least 5mV nominal output. The Exact is well above that and should be a great match.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Pages: 1   Go Up
« previous next »