Failed Voltage Test Page 47

ArtnShit · 1951

« previous next »
Pages: 1 2   Go Down

0 Members and 1 Guest are viewing this topic.

Offline ArtnShit

  • Full Member
  • ***
    • Posts: 115
Reply #15 on: February 19, 2022, 08:02:53 AM
The fuse is ok! Any other ideas about the sparks or the drop in voltage? I can double-check again if that's the move, too.

Sorry about all the questions and thank you for talking me through this.

a&s

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19374
Reply #16 on: February 19, 2022, 08:03:08 AM
Yes, double check the voltages.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline ArtnShit

  • Full Member
  • ***
    • Posts: 115
Reply #17 on: February 19, 2022, 08:12:11 AM
Double checked, everything is in the proper ranges now! Weird. Should I be concerned about that spark? I have a feeling I connected two metal things that weren't meant to touch, but everything is going fine now?

Thanks again for your help.

a&s

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19374
Reply #18 on: February 19, 2022, 08:17:01 AM
If everything is OK now, I wouldn't be too worried about the spark.  If your meter probes have a lot of exposed metal on the tips, you can wrap tape around all but the last tiny bit of metal to offer some additional protection.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1 2   Go Up
« previous next »