Bottlehead Forum
Bottlehead Kits => Moreplay => Topic started by: Mulburg on October 07, 2021, 01:42:03 PM
-
What are both pairs of RCA outputs for? I’ve only used the pair closest to the power jack.
-
The second set is for subwoofers, or a headphone amp, or bi-amping, or whatever you wish.
-
The second set is for subwoofers, or a headphone amp, or bi-amping, or whatever you wish.
Thank you. I guess I should switch over to the other pair to make sure they work. Bi-amping sounds promising.
-
The second set is for subwoofers, or a headphone amp, or bi-amping, or whatever you wish.
Hi Paul
I've just finished the Moreplay pre-amp and am interested in doing the crack headphone amp. Obviously I have my sources plugged into the moreplay, would it be a simple case of running a set of leads from the Moreplay outputs to the crack amp outputs ?
-
Yes, you can cable up the second set of Moreplay outputs to the Crack inputs. You may find that the volume pot on the Crack needs to be somewhere around 50%-75% rotation to allow for the Moreplay to be used in this way without things being overly sensitive.
-
Thanks again Paul !!!
Oh no, I'm getting the bug for this 🙂
-
No one ever eats just one potato chip, and no one ever builds just one Bottlehead kit.
I've now built 6.