Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Smash => Topic started by: jazzzman on February 11, 2015, 02:55:37 PM

Title: Smash dimensions
Post by: jazzzman on February 11, 2015, 02:55:37 PM

I am considering the Smash, but want to make sure it will fit in my space.  I cannot find the dimensions anywhere on the site.  Can anyone tell me all the dimensions (including height with tubes)?
Thanks

Title: Re: Smash dimensions
Post by: galyons on February 11, 2015, 03:50:17 PM

The Smash, in its stock base with stock feet  is 7" tall and 11.25"W x 11.25"L.  I may be a little plus or minus on height as I have the Smashup installed. The 6SN7 is lightly shorter than the OD3.  I guesstimated an allowance for that.

Hope it will fit. Great linestage and even better with the Smashup.

Cheers,
Geary

Title: Re: Smash dimensions
Post by: jazzzman on February 12, 2015, 05:31:08 AM

Thanks for the quick response.  It looks to be an interesting project!

Title: Re: Smash dimensions
Post by: jazzzman on February 13, 2015, 05:34:09 AM

I measured my space last night.  The shelf has 8 inches.  It is open in front and on the sides and vented in the back.  Do you think that is enough space or will the tubes be too close (I guess about 1 inch) to the top of the shelf?
Thanks again.

Title: Re: Smash dimensions
Post by: galyons on February 13, 2015, 06:43:29 AM

My shelf is pretty much the same, with not quite 8" height.  I have the Smash elevated on 1/2" cork/rubber risers to improve circulation.  There is not much space above to top of the tubes to the shelf above.  It has not been a problem.

Cheers,
Geary

Title: Re: Smash dimensions
Post by: jazzzman on February 13, 2015, 02:18:02 PM

Thanks, that is reassuring.