Bottlehead Forum
Bottlehead Kits => Crack => Topic started by: Th3RadMan on April 26, 2019, 09:32:06 PM
-
Everything in my build so far has worked perfectly. At the final voltage check for the large board I noticed the oa and ob terminals were reading 108-109v. The manual says 75-100v, so I wanted to come here to check to see if this is ok or not. I can post pics or any other info if there is an issue.
Thanks!
-
That is close enough to be OK.
-PB
-
What about 115v at both OA and OB? Still ok?
-
What about 115v at both OA and OB? Still ok?
What are your OA and OB voltages on the small board?