Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Crack-a-two-a => Topic started by: HF9 on March 12, 2018, 12:59:26 PM

Title: mW output on Crack-a-two-a?
Post by: HF9 on March 12, 2018, 12:59:26 PM

I was curious if there was a mW output rating available on Crack-a-two-a at various ohms (e.g. 300ohms, 600ohms, etc.)? I assume it is different than the Crack given the different power supply. Thanks!

Title: Re: mW output on Crack-a-two-a?
Post by: Doc B. on March 12, 2018, 01:08:49 PM

Since they run at the same operating point output is the same. Max output is about 10V into 300ohms.