Bottlehead Forum
Bottlehead Kits => Stereomour II => Topic started by: patrick620 on May 25, 2023, 08:59:13 AM
-
I seem to have lost the 3650F resistors . I have some that are 360 ohm and read 362. Will they work? Also, what is that wattage on the ones that were in the kit? Thanks.
-
362 is close enough. That's less than 1% deviation and the original parts were 1%. Probably 5% would be adequate in most cases.
Metal film is preferred, though carbon film is probably acceptable. Do not use carbon composition - it will be noisy and drift in value as it ages. Any power rating greater than 0.05 watts is adequate; I'd use 1/2 or 1/4 watt.
-
Thanks, Paul. I figured the ones I have on hand would be ok. I appreciate the confirmation. Actually I think my thief of a cat may have got them for her secret treasure pile ;)