Voltage Check Question...

skes16 · 850

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline skes16

  • Newbie
  • *
    • Posts: 2
on: January 18, 2014, 03:40:52 PM
Hello all, and thanks in advance for your help!

Today I added the speedball upgrade to my crack, and when it came to my voltage check, everything was fine except for terminals 19 and 20. 19 is supposed to have a value of 0, but shows up as 85. 20 is supposed to have a value of 206, but shows up as zero.

After checking absolutely everything and finding no problems, I did the final check and everything was okay.

After being plugged into a source and listening for a little while, everything seems to be working great but I am unsure if that is a good enough indication that nothing went wrong.

Should I continue to worry about these voltages, or should I be okay?

Thanks!!


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19390
Reply #1 on: January 18, 2014, 03:46:30 PM
There was a transcription error in the manual that led to some values being shifted. 

If terminals 1, 2, 4, 5, 7, and 9 have correct voltages, you're all set!

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline skes16

  • Newbie
  • *
    • Posts: 2
Reply #2 on: January 18, 2014, 03:57:17 PM
Awesome, that's a huge relief thanks!


Pages: 1   Go Up
« previous next »