Crack and Speedball installation manuals

Pluck · 1125

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Pluck

  • Jr. Member
  • **
    • Posts: 12
on: September 05, 2023, 04:51:01 AM
Hello all,

I have a Crack with Speedball installed that for various reasons has been mothballed for years!  Finally ready to get going with it again and I find that I have noise through one channel, which IIRC only commenced after I installed the Speedball all those years ago.  In the meantime, I have lost any instructions/CD's I had for both the Crack and the Speedball.  Anyone know if and where I can get access to the manuals so that I can troubleshoot my Crack?

Many thanks in advance.
« Last Edit: September 05, 2023, 04:55:34 AM by Pluck »


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19370
Reply #1 on: September 05, 2023, 05:57:15 AM
You would want to contact replacementparts(at)bottlehead(dot)com and provide them with your order information and request new manual downloads.

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Pluck

  • Jr. Member
  • **
    • Posts: 12
Reply #2 on: September 05, 2023, 06:04:12 AM
Thanks, I believe I still have a receipt - I will give that a go.


Offline Pluck

  • Jr. Member
  • **
    • Posts: 12
Reply #3 on: September 06, 2023, 05:20:48 AM
Well, I got in touch with Bottlehead, and Eileen very kindly (and very quickly) sent me the Crack and Speedball instructions.  I printed them all out, read through it all, nervously grabbed my soldering kit and DVM (I am very much an amateur) only to discover it was just a duff tube!  Replaced that and all is well, happy days.


Pages: 1   Go Up
« previous next »