Bottlehead Forum
Bottlehead Kits => Moreplay => Topic started by: Cary on August 05, 2021, 10:29:47 AM
-
I will start this off, I am using the Seductor amplifier. My Moreplay, it is using 6005A tubes instead of 6V6’s.
-
I use my Moreplay with a S.E.X. 3.0 and a pair of Klipsch RP-600m's as my office system. I enjoy being able to use multiple sources with the S.E.X. by using the Moreplay. I also really like how sweet the system sounds. Pretty amazing for a mere two watts!
-
ACA version 1.8
iPhone SE
Klipsch RP 600M
-
45 Stereomour 1 and a Schitt Vidar. Still using the stock 6V6's that came with it but there are some coke bottles waiting in the wings.
-
Hey guys this is my first post here! I absolutely love tube amplifiers and ordered the more play and reduction 1.1 kits. I am excited to learn about tube rolling and trying more tubes in the amplifier. When you reference coke bottle tubes, can I get a little more information about them? The code for example, what it would take to run one? Maybe a couple of pictures? Thank you!
-
A coke bottle shaped tube would be a 6V6G.
In order to run one, you would pull the tubes out of the Moreplay that we provide and plug in the 6V6Gs.
-
I'm considering getting a Moreplay to front a pair of Quad II power amps. Would it be compatible, need adjustment or attenuators? Basically would it be a good choice? I'm in the UK and am currently using a slimline Rotel pre. It's not one of their high end models, an RC-850. Currently using Luxman L30 into my Klipsch Quartets. I'm BH family as I have a crack for my HD600's.
-
The Quad II spec is about right (570mV/15 watt). Should work well.
-
Thanks Paul. I'll see how the funds are. It will end up being rather more expensive by the time it gets to me in the UK as I found out with the Crack. No regrets with that though.
Is the Moreplay suffering from any delays at the moment?
-
At the moment we have power transformers and chassis panels in stock for Moreplay kits. The situation is dynamic because of the supply chain issues and the holidays. So it's hard to say for how long we will have stock on hand and how quickly the parts can be replenished. We are increasing our order quantities and lead times where we can to compensate.
-
Thanks Doc.
-
Hopefully my order, taking advantage of your Black Friday price, has just gone in. I await a confirmation. Little glitch was my name, Deluk, wasn't recognised and I had to update my email address but all seemed to click through OK. If OK can you give a guess as to shipment date? Thanks.
-
If OK can you give a guess as to shipment date?
Best I can tell you while we are in the middle of the biggest sale of the year is that we start shipping what we can as soon as we can. We ship all thru December as parts arrive and we are typically shipping the last of the BFCM orders in early January. I'll probably have a little better idea on Tuesday after the sale is complete.
-
Thanks Doc.
-
I am using the Seductor amplifier. 7C5 tubes in the Moreplay.
-
Setup:
Music Streamer: Bluesound Node2i streaming Tidal
DAC: Schiit Bifrost 2
Pre-amp: Bottlehead Moreplay
Power Amp: Schiit Aegir
Speakers: Zu Audio Dirty Weekends
Apparel: Bottlehead Baseball cap
Sound is superb!
-
I've got my Moreplay connected to my Crack with Speedball and a Decware SE84UFO amp into a pair of Omega Junior 8 XRS speakers. Using some new production Mullard 6V6GT's at the moment but have a selection of 6K6 tubes coming in tomorrow that I'm looking forward to trying.
Regards,
Mario
-
I am using mostly my class A Pass DIY amps. ACA, F4 and Aleph J.
-
Setup:
Music Streamer: Bluesound Node2i streaming Tidal
DAC: Schiit Bifrost 2
Pre-amp: Bottlehead Moreplay
Power Amp: Schiit Aegir
Speakers: Zu Audio Dirty Weekends
Apparel: Bottlehead Baseball cap
Sound is superb!
Hi David, I am no doubt older than you at 71, but I have been into audio for many years. Back in the 70's, I managed a high end stereo store called Magnolia Hi Fi. I ran the original Magnolia village store. Point being I am "old school" on some of the newer items today. I am wondering if you can let me know how you use your Music Streamer: Bluesound Node2i streaming Tidal? I do stream from my phone to my system with a dragonfly DAC in between currently, but are there advantages to this Node 2i? I am in the dark. Thanks, Don
-
I've hooked the Moreplay into my Decware ZKIT 1. As I primarily play vinyl, I use the ifi Zen phono stage. The music is magically coming out of a pair of Klipsch Heresy 1 speakers. The Moreplay was such an improvement, I'm considering building an Eros 2.
-
Dared monoblocks
-
Setup:
Music Streamer: Bluesound Node2i streaming Tidal
DAC: Schiit Bifrost 2
Pre-amp: Bottlehead Moreplay
Power Amp: Schiit Aegir
Speakers: Zu Audio Dirty Weekends
Apparel: Bottlehead Baseball cap
Sound is superb!
Hi David,
I have my moreplay hooked up to a Carver CM1090 amp (with the preamp bypassed), and I wanted to try an aegir power amp. I have a pair of psb imagine x1t speakers, which have a sensitivity of 90db and are 8 ohms. Do you think the aegir could run my speakers?
Cheers!
Mauro
-
Two amps, a Nobsound 6P1 (class-A SET all signal-path caps upgraded) & a pair of ACA's configured as mono blocks and driven using the balanced inputs. The amps drive the speakers through an A/B switch (Douk Audio VU3).
My system setup:
Ortofon 2m Bronze Airplay
U-Turn Orbit Theory WIIM Mini
Eros 2 Aries II DAC
Moreplay > second out > Crack + Speedball > HD 650
Main out
V
Schiit Lokius eq
SE out balanced out
V V
Nobsound 6P1 ACA Mono Blocks
A/B switch
Hsu Research ULS-15 MK2 subwoofer
DYI DML panel speakers
Sounds amazing and has been super fun to build!
-
I'm using the Moreplay with 6v6 cv 509 coke bottle tubes with
the Reduction phono preamp with integration upgrade.
A Fluance RT85 with Ortofon 2M blue running through a pair of
KT 88 monoblocks by Quicksilver through a pair of
Klipsch Forte II.
-
Elekit TU8600
-
Heavily modified DIYHiFiSupply 300B monoblocks
ANK Audiokits EL34 monoblocks
Bottlehead and Paul Birkeland-modified Paramount 2A3s
AudioNote Kit 4 AN/E speakers
-
AnalogEthos Legendarium -> Tekton Lores
I’ll be starting my Kaiju build as soon as the chassis comes back from powder coating
-
I'm feeding a Benchmark AHB2 amp. The Benchmark has XLR input only so I fabricated some cables to fit. Source is a Lumin D2 with an excellent volume control so I rarely adjust the Moreplay's volume knob. Turntable is on permanent vacation.
-
I'm considering a Moreplay to pair with my Dynakit ST-35.
I believe this will be compatible for impedance matching:
Moreplay Output impedance: less than 3.2Kohms at all levels. For 1V in/1V out, 2.1Kohms.
ST-35 INPUT IMPEDANCE: 500K OHMS
500/3.2 = 156.25
I understand a ration of 10-1 is an absolute minimum with 50 to 75-1 preferred.
Is this a good pairing?
-
Yes, that's fine.
I'll just note that a typical SET amp drives a speaker with an impedance ratio of around 3:1 and sounds fine - so 10:1 is more nearly overkill than an "absolute minimum," at least in some cases.
-
Gustard A26 -> Bottlehead Moreplay -> Ferrum Oor + Hypsos for headphones.