Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: wolf_math on April 26, 2017, 06:29:27 AM

Title: Crack Resistance Check
Post by: wolf_math on April 26, 2017, 06:29:27 AM: I just finished the build on my Crack. In every place where I'm supposed to get a 0Î© (terminals 3, 6, 8, 10, 12, 14, 20, and 22) including the ground, I'm getting a resistance of between 1.1 and 1.5Î©. Any ideas on what's going on here? All of the other resistance checks worked perfectly.

Thanks.
Title: Re: Crack Resistance Check
Post by: fullheadofnothing on April 26, 2017, 06:36:06 AM: What do you get when you touch your probes together?
Title: Re: Crack Resistance Check
Post by: wolf_math on April 26, 2017, 06:47:49 AM: Quote from: fullheadofnothing on April 26, 2017, 06:36:06 AM
What do you get when you touch your probes together?

0Î©
Title: Re: Crack Resistance Check
Post by: fullheadofnothing on April 26, 2017, 06:49:47 AM: Then you have a miswire. Please post pictures.
Title: Re: Crack Resistance Check
Post by: wolf_math on April 26, 2017, 06:51:02 AM: Quote from: fullheadofnothing on April 26, 2017, 06:36:06 AM
What do you get when you touch your probes together?

>:( I figured it out. The alligator clip was adding 1Î©, but when I removed it everything was reading 0Î©.

Thanks for the help!
Title: Re: Crack Resistance Check
Post by: fullheadofnothing on April 26, 2017, 06:53:35 AM: Excellent!

Good luck with your voltages.