Bottlehead Forum

General Category => General Discussion => Topic started by: marv524 on May 25, 2017, 03:01:14 AM

Title: need advice on 2nd hand/used bottle head crack purchase
Post by: marv524 on May 25, 2017, 03:01:14 AM

hi, guys, this is my first post here and i dont know if i posted in the right section... im in france and its very difficult to find bottlehead crach here....but i found one who is selling his crack with upgrades:

RCA Cardas Rothium
Cathode Magnetic Resistors Non-Inductive wirewound
Power Resistance Mills Non-Inductive wirewound
Takman carbon film film resistors
Resistance of B + Takman metal film
Tube holders QQQ JAPAN
Potentiometer TKD JAPAN
Quality switch Made in JAPAN
Capacitor in parallel with the output capacitor.
High-end resistance amtrans

BTW the seller will also include the ff tubes on the sale

mullard 6080
12au7 raytheon


im about to pull the trigger on it just wanted to seek the advice of those those who are really familiar with it.. i have attached some pics of the crack mentioned. asking price is 350 euros... is it a good deal?   i was contemplating on getting  a darkvoice 336se .... any advise? thanks

Title: Re: need advice on 2nd hand/used bottle head crack purchase
Post by: marv524 on May 25, 2017, 03:49:10 AM

any advise on this will be greatly appreciated.. thanks again.....

choosing between this and a brand new darkvoice 336se

brand new darkvoice is 50 euros cheaper

Title: Re: need advice on 2nd hand/used bottle head crack purchase
Post by: mcandmar on May 25, 2017, 04:13:28 AM

That Crack is built the wrong way around, i.e. the chassis plate is upside down.

Title: Re: need advice on 2nd hand/used bottle head crack purchase
Post by: marv524 on May 25, 2017, 04:18:38 AM

i noticed that too.. but will it affect the performance/sound negatively?

Title: Re: need advice on 2nd hand/used bottle head crack purchase
Post by: Doc B. on May 25, 2017, 04:22:57 AM

It will affect any attempt at service or modification. The assembly manual won't make sense, as the wiring will look different and the terminal numbering will be confusing. That will also make it difficult for us to offer assistance through the forum.

Title: Re: need advice on 2nd hand/used bottle head crack purchase
Post by: marv524 on May 25, 2017, 04:31:50 AM

oh i see, thank you for the valuable advice, i will drop it then..


thank you