Bottlehead Forum

General Category => General Discussion => Topic started by: denti alligator on June 15, 2017, 12:06:41 PM

Title: center pin of RCA moving ... is this a problem
Post by: denti alligator on June 15, 2017, 12:06:41 PM

Soldered the center pins of the RCAs and now those pins are moving. They aren't loose, but they turn in place. I'm using different RCAs, so maybe this is special to them? (see pic)

Or did I overheat them? Question is: should I replace these now, or will they be fine?

Title: Re: center pin of RCA moving ... is this a problem
Post by: denti alligator on July 13, 2017, 03:12:03 AM

Apparently this wasn't a problem, by the way.