Bottlehead Forum

Bottlehead Kits => S.E.X. Kit => Topic started by: Jim R. on August 16, 2017, 10:18:43 AM

Title: Wiring PF cap?
Post by: Jim R. on August 16, 2017, 10:18:43 AM

Between which terminals do the PF caps get installed?

I've got a couple of fairly large caps and I want to see if I can find a way to fit them in but I don't want to build the kit to see if it will work or not. If I know where, approximately they install, I can figure out if they'll work or not.

Thanks,

Jim

Title: Re: Wiring PF cap?
Post by: fullheadofnothing on August 16, 2017, 10:44:38 AM

A2 - 15U
B2 - 25U

Title: Re: Wiring PF cap?
Post by: Jim R. on August 16, 2017, 10:53:17 AM

Thanks, Josh.

Looks asymmetrical to me.

-- Jim

Title: Re: Wiring PF cap?
Post by: fullheadofnothing on August 16, 2017, 11:08:40 AM

It's not bilateral symmetry; the two sides are wired the same.

Title: Re: Wiring PF cap?
Post by: Jim R. on August 16, 2017, 12:44:26 PM

Good thing they have long leads :-).

Thanks again.

Title: Re: Wiring PF cap?
Post by: kevner21 on February 11, 2018, 01:50:07 PM

I'm not so thrilled with the Lebon capacitors in the S.E.X.3.0 it may not work in the direct signal of the amp , but I'm going to look for something more substantial ?!?!?!!!!!!

Title: Re: Wiring PF cap?
Post by: fullheadofnothing on February 12, 2018, 06:47:44 AM

The parafeed capacitor is made by Solen

I'm not familiar with Le Bon capacitors.

https://youtu.be/oOg5VxrRTi0

Looks pretty substantial to me...

Title: Re: Wiring PF cap?
Post by: kevner21 on February 12, 2018, 08:08:46 AM

sorry in the wrong thread