Bottlehead Forum

Bottlehead Kits => S.E.X. Kit => Topic started by: JeffYoung on September 20, 2017, 09:01:05 AM

Title: SEX output grounding question
Post by: JeffYoung on September 20, 2017, 09:01:05 AM

The schematic shows both the headphone and speaker outputs being referenced to ground.  However, the TRS socket I got is 3-way switching (and the 0ohm resistors are on the speaker side), so the headphone output is not referenced to ground.


My speaker and headphone outputs are on front and back panels.  I assume it would be OK to make the ground reference at OT1 and OT2 (so that the headphone output is also referenced to ground)?


Thanks,
Jeff.

Title: Re: SEX output grounding question
Post by: Paul Birkeland on September 20, 2017, 10:19:25 AM

You can do this, or add the ground reference at your headphone jack.

Title: Re: SEX output grounding question
Post by: JeffYoung on September 20, 2017, 11:30:05 AM

Cool; thanks Paul!