Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: B13B3R on December 17, 2017, 07:04:52 AM

Title: slightly high voltage on speedball
Post by: B13B3R on December 17, 2017, 07:04:52 AM

All voltages on small board are acceptable and all except the oa and ob on the big board.
Is 107v on oa and 105v on ob acceptable?

Title: Re: slightly high voltage on speedball
Post by: B13B3R on December 17, 2017, 07:08:20 AM

All leds are functional

Title: Re: slightly high voltage on speedball
Post by: Paul Birkeland on December 17, 2017, 07:20:38 AM

We probably need to adjust the voltage range a bit there.  If you have more like 90V coming out of the small PCB, then seeing over 100V on the output of the large PCB is totally reasonable.