Bottlehead Forum

Bottlehead Kits => BeePre => Topic started by: kip.duff on December 20, 2017, 10:59:28 AM

Title: installing Beequiet as I buiuld Beepre- voltage tests still still accurate?
Post by: kip.duff on December 20, 2017, 10:59:28 AM

I'm at fork in road where I'm installing volume control wiring in my BeePre.  I would prefer to go straight to BeeQuiet install as part of Beepre assembling.  Will the voltage tests for the stock Beepre in the assembly manual still be accurate?

Title: Re: installing Beequiet as I buiuld Beepre- voltage tests still still accurate?
Post by: Doc B. on December 20, 2017, 11:42:07 AM

I would suggest that, if you are unsure of whether the testing of the circuit is valid with the shortcut being installed during the initial build it probably makes sense to build the amp stock, make sure it passes all the tests and then install the upgrade.

Title: Re: installing Beequiet as I buiuld Beepre- voltage tests still still accurate?
Post by: kip.duff on December 20, 2017, 03:28:21 PM

OK.  THanks for advice.