Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: i luvmusic 2 on January 19, 2018, 01:52:32 PM

Title: Removing The Volume Pot for my CRACK/S.E.X. Amp.
Post by: i luvmusic 2 on January 19, 2018, 01:52:32 PM

Since i've been using my DIY Tube Preamp to control the Crack and S.E.X. i would like to remove the POT for both amp,I would like to know if i need to replace the POT with a resistors?The used POT will be installed into my new DIY Preamp.Thanks!

Title: Re: Removing The Volume Pot for my CRACK/S.E.X. Amp.
Post by: Paul Birkeland on January 22, 2018, 06:43:00 AM

If you turn both pots all the way up, they will act as a nice pair of carbon film 100K resistors.