Bottlehead Forum

Bottlehead Kits => S.E.X. Kit => Topic started by: needmorewood on February 03, 2018, 07:07:33 AM

Title: Voltage Check fails
Post by: needmorewood on February 03, 2018, 07:07:33 AM

All resistance values were measured and perfect

Terminal 2,3 and 4 measure at ~54V while their counterparts measure the appropriate values (terminals 16/17/18)

has anyone else come across something like this? could it be the ot-2?

Any help is welcomed and I can provide more information as needed

UPDATE1: the 0.1 micorfarad capacitor on terms 2 and 4 is blown, looking for a replacement in Canada

Title: Re: Voltage Check fails
Post by: needmorewood on February 03, 2018, 07:10:16 AM

Apologies in advance for any bluntness  very sick right now  :'(

Title: Re: Voltage Check fails
Post by: needmorewood on February 03, 2018, 10:16:30 AM

on one of my messups I assume that I blown the 400v capacitor,

replaced it with a new one.

Title: Re: Voltage Check fails
Post by: timindq on February 03, 2018, 03:34:52 PM

Quote from: needmorewood on February 03, 2018, 10:16:30 AM

on one of my messups I assume that I blown the 400v capacitor,

replaced it with a new one.

And all is well after replacement?

Title: Re: Voltage Check fails
Post by: Paul Birkeland on February 05, 2018, 10:04:05 AM

If you remove the 0.1uF cap, the voltages should still be correct.