Bottlehead Forum

Bottlehead Kits => Mainline => Topic started by: Mordicai on April 30, 2018, 09:49:49 AM

Title: Bias/Regulator board
Post by: Mordicai on April 30, 2018, 09:49:49 AM

Just finished it and realized one of the trim pots is in backwards. Im not sure I can get that out and back in. Any advice would be welcome. The chicken in me just wants to see if I can buy the makings of a new board from Josh and do it over.

Title: Re: Bias/Regulator board
Post by: Doc B. on April 30, 2018, 10:16:32 AM

Seems like the pot should work either way. Go ahead and give it a try as-is before you pull it out.

Title: Re: Bias/Regulator board
Post by: Mordicai on April 30, 2018, 10:25:00 AM

Thanks Doc, losing my concentration.