Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: samhillt on May 20, 2018, 02:38:00 PM

Title: Intermittent high pitched whine in left channel
Post by: samhillt on May 20, 2018, 02:38:00 PM

Hi,

I'm having a small problem with a whine in the left channel. Description

• It's very faint, and high pitched
• It's intermittent, sometimes very quickly fading in and out
• If I tap the crack it will make it stop (briefly)
• No change with volume adjustment
• Does it with input disconnected

I took some steel wool to the pins to clean, but I'm still hearing it.
Any ideas?

Thanks

Title: Re: Intermittent high pitched whine in left channel
Post by: Kitchener on May 21, 2018, 03:46:10 AM

You might have to heat up your soldering iron and give your joints a good do-over, it’s the quickest solution.
If you post some pictures from your Crack’s insides, the Bottlehead crew could tell you if any of your solder joints look flaky.

Title: Re: Intermittent high pitched whine in left channel
Post by: Paul Birkeland on May 21, 2018, 04:11:10 AM

Quote from: samhillt on May 20, 2018, 02:38:00 PM

If I tap the crack it will make it stop (briefly)

That is indeed usually a flaky solder joint.