Bottlehead Forum
Bottlehead Kits => Crack => Topic started by: [email protected] on September 22, 2018, 04:11:03 PM
-
Hi,
I was stupid and cut one of the UF4007 diodes that came with the Crack kit too short and am in need of buying a new one.
Are there any specific requirements I need on these UF4007 or any UF4007 is fine?
Thanks!
-
Any old UF4007 is going to be just fine. Your local parts store may carry NTE parts, and the NTE575 is equivalent.
In a pinch, you should very easily be able to find the following diodes at the local electronics shop that will also work OK:
1N4007, 1N4006, 1N4005
There are hundreds that will actually work, but only a couple that are as good or better performing than the UF4007.
-
Any old UF4007 is going to be just fine. Your local parts store may carry NTE parts, and the NTE575 is equivalent.
In a pinch, you should very easily be able to find the following diodes at the local electronics shop that will also work OK:
1N4007, 1N4006, 1N4005
There are hundreds that will actually work, but only a couple that are as good or better performing than the UF4007.
Thank you!