Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: Jimb0 on July 10, 2020, 07:27:03 AM

Title: Can the old speedball be used on the Crack 1.1?
Post by: Jimb0 on July 10, 2020, 07:27:03 AM

Are there any wiring differences other than the ones going to the Speedball that I need to change?

Title: Re: Can the old speedball be used on the Crack 1.1?
Post by: Paul Birkeland on July 10, 2020, 07:28:04 AM

You could do that, sure.  An old Speedball will be old enough that I would throw away the LEDs and replace them.

Title: Re: Can the old speedball be used on the Crack 1.1?
Post by: Jimb0 on July 10, 2020, 07:52:55 AM

Thanks PB

Title: Re: Can the old speedball be used on the Crack 1.1?
Post by: Paul Birkeland on July 10, 2020, 08:06:33 AM

In a pinch, you can bake the HLMP-6000s in your oven at a low temperature for 5-6 hours to get any moisture out.  You'd have to look up the temperature specs for doing that though.