Bottlehead Forum

Bottlehead Kits => Legacy Kit Products => Foreplay III => Topic started by: khingila on November 16, 2010, 06:56:02 PM

Title: extended foreplay III circuit board loading question.
Post by: khingila on November 16, 2010, 06:56:02 PM

is it safe to assume that if an mje350 HAD a metal face, which these don't, that it would be the face without identification markings?

Title: Re: extended foreplay III circuit board loading question.
Post by: Paul Joppa on November 16, 2010, 07:18:57 PM

http://www.bottlehead.com/smf/index.php/topic,845.0.html

See this post in the General forum.  :^)

Title: Re: extended foreplay III circuit board loading question.
Post by: khingila on November 17, 2010, 02:12:02 AM

thanks! i searched only in the foreplay section, and was surprised it didn't come up there.

Title: Re: extended foreplay III circuit board loading question.
Post by: Grainger49 on November 17, 2010, 04:46:44 AM

Quote from: khingila on November 17, 2010, 02:12:02 AM

thanks! i searched only in the foreplay section, and was surprised it didn't come up there.

I think that is a reasonable thing to do.  My searches on some other sites come back empty because I don't use enough characters.  Bottlehead is better. 

The MJE transistors are used in all the constant current source boards in all of the products that either come with one or have one as an option.  You wouldn't have a reason to know that.  But that is why Doc posted in the General forum.