Bottlehead Forum

Bottlehead Kits => Crack => Topic started by: bucketofguts on November 23, 2020, 03:47:58 PM

Title: I Built a Crack
Post by: bucketofguts on November 23, 2020, 03:47:58 PM

Sounds better than it looks

Title: Re: I Built a Crack
Post by: Paul Birkeland on November 23, 2020, 04:02:15 PM

I think it looks nice.

Title: Re: I Built a Crack
Post by: bucketofguts on November 23, 2020, 04:11:26 PM

Kind words! Much obliged! I am not finished,,,,,,,,,,,,,,,,,,,,,,

Title: Re: I Built a Crack
Post by: jtori on November 24, 2020, 03:33:14 AM

Nice job!  Enjoy!

Title: Re: I Built a Crack
Post by: bucketofguts on November 24, 2020, 08:29:38 AM

Thank you! I think I should have said "Sounds great not finished".

Title: Re: I Built a Crack
Post by: bucketofguts on January 03, 2021, 08:11:38 AM

My training is complete for now. Speedball installed with no issues. Nice to have a small solder tip. What a cool project. Much obliged to all the work put into such a fine sounding headphone amp. Keep the rubber down Doc.

Title: Re: I Built a Crack
Post by: andyh on January 03, 2021, 10:20:37 AM

That looks great, well done you.

Title: Re: I Built a Crack
Post by: bucketofguts on January 04, 2021, 09:52:32 AM

I thank you!  I have some some really good pics coming when I can get Linux to shake hands with the cloud and size correctly. Stay tuned............

Title: Re: I Built a Crack
Post by: Karl5150 on January 05, 2021, 07:56:02 AM

Nice. What's the finish on the plate?
Karl

Title: Re: I Built a Crack
Post by: bucketofguts on January 06, 2021, 01:29:33 PM

Touch up Volvo silver green metallic. A couple coats and a few coats of clear. Funny thing as it heated and cooled it made a crinkle coat which looks very cool, but almost impossible to capture via a pic. I am working on it. Thank you!